Läpivienti 1 1/4″ komposiitti Musta 38 mm Trudesig

Trudesign Läpivienti 1 1/4″ komposiitti Musta 38mm
ISO 9093-2,

Kestävät ja kevyet komposiittiläpiviennit ovat suunniteltu ja valmistettu Uudessa-Seelannissa. Ei korroosiota, ei hapettumista eikä sähkövuotoja.
Voidaan käyttää kaikkien venevalmistusmateriaalien kanssa, kuten; teräs, alumiini, lasikuitu, muovi, jne. Sertifioitu IMCI & Bureau Veritas ISO 9093-2 -standardin mukaisesti.

Viodaan käyttää vesilinjan alla sekä yläpuolisiin läpivienteihin. Asennuksessa tiivistä Sikaflex 291, Loctite 5331 tai vastaava tiivistysmassa.
Huom. Vesinlinja alapuolisiin osiin sulkuhana on aina asennetta suoraan läpivientiin

Suitable for underwater use, TruDesign range of Skin Fittings are certified by the International Marine Certification Institute (IMCI) and Bureau VERITAS to ISO 9093-2.
They also comply with ABYC H-27 when used in conjunction with the TruDesign ABYC collar.

Designed and made in New Zealand, the Skin Fitting body and nut are moulded from a glass-reinforced nylon composite.
High strength, high-modulus glass fibres provide dramatic strength, stiffness, toughness and dimensional stability. These properties allow a significant weight reduction over metallic fittings.
TruDesign Skin Fittings eliminate the corrosion and electrical bonding problems associated with metallic fittings.

When used in below waterline applications, a Ball Valve should be directly connected for safety and compliance to relevant marine standards.

• Compatible with all hull types – Can be used on aluminium, steel, wood, composite & GRP hulls.
▪ Chemical resistant – Unaffected by diesel, petrol, chemicals, and antifouling paints.
▪ U.V resistant – Will not degrade or discolour from the sun’s ultraviolet rays.
▪ Paintable – Paintable with all types of antifoul including Coppercoat™
▪ Fits TruDesign Ball Valves and other parallel BSP or NPS threads – Universal compatibility to TruDesign brand fittings and other marine hardware.
▪ Large operating range – Suitable for all marine conditions from -40°C to +110°C
▪ Meets ABYC H-27 Standard when installed in combination with TruDesign Valves & Load Bearing Collars.

32081-TD90478, 32082-TD90422, 32082-TD90678, 32082-TD90564 , 32082-TD90857, 32081-TD90551, 32081-TD90552, 32082-TD90554, 5125-DWHOSE32A, 5125-DWHOSE38A, 605S291B310,